Mini Magnetic Staple Caddy
Do your hammer tacker staples constantly break when they’re in your tool belt or there just isn’t a perfect spot for them? We’ve got the perfect solution - the mini magnetic fastener caddy.
We developed the mini caddy so that you can clip it on your belt, tool bag or simply put it into a tool bag compartment to keep staples from breaking into little pieces. Our flexible caddy measuring at 1 1/4” x 1 1/4” x 3 1/4” deep (34mm x 34mm x 90mm deep) is suitable for a variety of staples found on the job site. Put your tacker staples & crown staples in your pouch without the worry of them breaking apart.
There are 2 magnets imbedded into the bottom of the caddy so that the fasteners will stay in there if you choose to jump or tip it slightly.
Our caddy is made with thermal polyurethane. There is not need to worry about it breaking as the material is stiff, but flexible. The built in clip will accommodate up to a 2” belt, or clip onto dividers in your tool bag. Built in drain holes prevent water and sawdust from collecting in the bottom.
Holes near the bottom allow you to blow out metal shavings easily
Shipping and Taxes calculated at check out.
*Note - tool bags and fasteners not included with purchase
Do your hammer tacker staples constantly break when they’re in your tool belt or there just isn’t a perfect spot for them? We’ve got the perfect solution - the mini magnetic fastener caddy.
We developed the mini caddy so that you can clip it on your belt, tool bag or simply put it into a tool bag compartment to keep staples from breaking into little pieces. Our flexible caddy measuring at 1 1/4” x 1 1/4” x 3 1/4” deep (34mm x 34mm x 90mm deep) is suitable for a variety of staples found on the job site. Put your tacker staples & crown staples in your pouch without the worry of them breaking apart.
There are 2 magnets imbedded into the bottom of the caddy so that the fasteners will stay in there if you choose to jump or tip it slightly.
Our caddy is made with thermal polyurethane. There is not need to worry about it breaking as the material is stiff, but flexible. The built in clip will accommodate up to a 2” belt, or clip onto dividers in your tool bag. Built in drain holes prevent water and sawdust from collecting in the bottom.
Holes near the bottom allow you to blow out metal shavings easily
Shipping and Taxes calculated at check out.
*Note - tool bags and fasteners not included with purchase
Do your hammer tacker staples constantly break when they’re in your tool belt or there just isn’t a perfect spot for them? We’ve got the perfect solution - the mini magnetic fastener caddy.
We developed the mini caddy so that you can clip it on your belt, tool bag or simply put it into a tool bag compartment to keep staples from breaking into little pieces. Our flexible caddy measuring at 1 1/4” x 1 1/4” x 3 1/4” deep (34mm x 34mm x 90mm deep) is suitable for a variety of staples found on the job site. Put your tacker staples & crown staples in your pouch without the worry of them breaking apart.
There are 2 magnets imbedded into the bottom of the caddy so that the fasteners will stay in there if you choose to jump or tip it slightly.
Our caddy is made with thermal polyurethane. There is not need to worry about it breaking as the material is stiff, but flexible. The built in clip will accommodate up to a 2” belt, or clip onto dividers in your tool bag. Built in drain holes prevent water and sawdust from collecting in the bottom.
Holes near the bottom allow you to blow out metal shavings easily
Shipping and Taxes calculated at check out.
*Note - tool bags and fasteners not included with purchase